Tamiya F104 PRO II w/Body On Road 2WD TAM58652

**Additional Technical Info Will Be Added When It Becomes Available. ** This is the 1/10 scale, electric powered, radio controlled F104 Pro II On-Road Racing Car kit.

FEATURES:
Chassis: PRO specification 0.12" (3.2mm) thick carbon fiber, 0.079" (2mm) thick carbon fiber upper deck, new lower deck, inline battery position Drive: Two wheel direct with carbon drive shaft Motor: 540 type Differential: Ball type with aluminum housing Ball Bearings: Full set Body: Clear untrimmed polycarbonate with separate rear wing, new design based on the 2017 F1 car bodywork and wing dimensions Steering: Isometric steering rods links with longitudinally mounted steering servo position Front Suspension: Independent coil spring, camber can be adjusted by changing upper mount attachment direction Rear Suspension: T-bar with carbon friction plate and TRF oil- filled shock Tires: Semi-pneumatic synthetic rubber Wheels: Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Non-adjustable

YOU WILL RECEIVE:
Tamiya F104 Pro On-Road Racing Car kit, tires, wheels, motor, 04 module spur gear, decals, body, shock oil, instruction manual, oil-filled shock and 25 tooth pinion gear

REQUIREMENTS:
Radio: 2-channel, small ESC and receiver recommended, standard servo Radio Batteries: Eight AA Battery: 6-cell stick pack with Tamiya type connector Battery Charger: Peak type recommended Building and track equipment

SPECIFICATIONS:
Vehicle- length: 17.3" (440mm) width: 7.1" (180mm) height: 3.5" (88mm) Wheelbase: 10.6" (270mm) Tread: Front, 5.9" (150mm), Rear, 5.7" (145mm) measurement at center of wheels, side-to-side Body- length: width: height:

COMMENTS:
For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 6x10mm Rear Shaft 1 DTXC1561 2 8x12mm Ball Diff 1 DTXC1581 1 5x11mm Diff Housing 1 DTXC1547 4 5x10mm Front Wheels 2 DTXC1535 4 5x10mm Rear Wheels 2 DTXC1535 jxs 12/27/17 ACCESSORIES