Tamiya 1:10 Lancia Delta Integrale XV-01 4WD Kit TAM58569

This is the Electric Powered, Radio Controlled, 1/10 scale Lancia Delta Integrale XV-01 Rally Car Chassis Kit from Tamiya.

FEATURES:
Chassis: Molded plastic with front and rear wheel well liners for protection against mud Drive: Four wheel reinforced belt drive Motor: 540 size brushed Differentials: Bevel gear Steering: Long tie-rod system to reduce bump steer, high torque servo saver Suspension: Double wishbone, reversible rear suspension for off-road driving and toe angle setting changes Ball Bearings: Full set Shocks: CVA oil-filled plastic body Battery Access: Hatch on underside of chassis Tires: Rally block 1.02" (26mm) wide, 2.6" (65.4mm) diameter with foam inserts Wheels: White plastic, 1" (25.4mm) wide, 1.9" (48mm) diameter, 12mm hex Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable, front and rear caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis Body: Clear untrimmed polycarbonate Bumper: Front, urethane foam Spur Gear: 68 tooth plastic Pinion Gear: 22 tooth steel

YOU WILL RECEIVE:
XV-01 Chassis Kit with Shocks, Shock Oil, Tires, Foam Inserts, Wheels, Decals, Spur Gear, Pinion Gear, Clear Body and Instruction Manual

REQUIREMENTS:
Radio: 2-channel with high-speed steering servo ESC: For 540 size brushed motor, must handle at least 23 turn motor Battery: 7.2V 6-cell stick pack with Standard connector Building and track equipment

SPECIFICATIONS:
Vehicle- length: 15.1" (384mm) width: 7.3" (185mm) Wheelbase: 10.1" (257mm) Body- length: 15.6" (397mm) width: 6.4" (162mm) behind front wheels, narrowest point 7.7" (195mm) at rear wheels, widest point height: 4.3" (109mm)

COMMENTS:
For replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 10x15mm Fr Diff 1 DTXC1595 2 10x15mm Rear Diff 1 DTXC1595 2 4x8mm Idler Gear Shaft 1 DTXC1511 1 4x8mm Counter Gear 1 DTXC1511 1 5x10mm Counter Gear 1 DTXC1535 2 4x8mm Middle Shaft 1 DTXC1511 4 5x8mm Steering 2 DTXC1523 2 5x10mm Front Arms 1 DTXC1535 2 5x10mm Rear Arms 1 DTXC1535 jxs 07/23/13 ir/jxs &