Tamiya 1/10 RC BMW 318i STW TT-01 TYPE-E LIMITED EDITION RE-RELEASE TAM58516

This is the radio controlled, electric powered 1/10 scale, BMW 318i STW On-Road Car Kit. This car can be used in Tamiya Official Races.

FEATURES:
Chassis: TT-01 type E composite chassis-compatible with a variety of Tamiya Option Parts Drive: Four wheel shaft drive Electronic Speed Control: Tamiya TEU-104BK with reverse Motor: 540 motor with pre-attached leads Ball Bearings: Installed in differentials, bushings in wheel hubs Shocks: Friction, plastic body Gearbox: Sealed, front and rear Differentials: Bevel gear, bushing equipped Transmission: Single speed Body: Clear untrimmed, with window mask and body trim decals Tires: Slick 1.0" (26mm) wide, 2.6" (65.5mm) diameter Wheels: Matte chrome 2.0" (52mm) outer diameter, 0.94" (24mm) wide +2 offset and white colored set with zero offset Bumper: Front foam Suspension: Independent double wishbone Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Bell-crank type with servo saver

YOU WILL RECEIVE:
BMW 318i, 540 motor, ESC, clear body, tires, foam bumper, 19 tooth pinion gear, 61 tooth spur gear, window mask decals, two sets of wheels and instruction manual

REQUIREMENTS:
Radio: 2-channel with one standard servo Radio Batteries: 8 AA size (for transmitter) Battery: 6-cell stick pack with standard connector Charger: AC/DC timed or peak for 6-cell battery Misc. Items: Building and track equipment

SPECIFICATIONS:
VEHICLE- Length: 15.7" (400mm) Width: 7.2" (183mm) Height: 5.5" (140mm) Wheelbase: 10.1" (257mm) BODY- Length: 17.1" (435mm) Width: 7.4" (188mm) at widest point Height: 4.2" (106mm)

COMMENTS:
For replacement, or to upgrade to Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 5x11mm Front Hubs 1 DTXC1547 2 5x11mm Rear Hubs 1 DTXC1547 2 8x12mm Front Diff 1 DTXC1581 2 8x12mm Rear Diff 1 DTXC1581 2 5x11mm Fr Driveshaft Joint 1 DTXC1547 2 5x11mm Rear Driveshaft Joint 1 DTXC1547 Body shown on box is painted white with all sponsor decals applied jxs 04/10/12 ir/jxs&