RPM R/C Products Axle Carriers/Oversized Bearings Blue:Revo/Slayer RPM80585

This is a set of optional RPM Axle Carriers/Steering Blocks for the TRA Revo. These will also work on the T/E Maxx 2.5R and 3.3 versions.

FEATURES:
Constructed of molded composite material, blue in color Wall thickness around the pillow-balls has been increased by 40% eliminating split walls Over 20% more material supports the pillow-balls, preventing them from pulling through Redesigned reinforcing rib supporting tie rod mount Redesigned boot lock tabs for easier removal of the silicone boots Press-fit bearings in the carrier for reduced axle movement Two-piece pillow-ball set screws use aluminum and Delrin for the ultimate in holding power under extreme situations

YOU WILL RECEIVE:
Two Axle Carriers/Steering Blocks Two 12x21x5mm Inner Bearings Two 6x15x5mm Outer Bearings Four Aluminum Set Screws Four Delrin Bushing Caps Instruction Sheet

REQUIREMENTS:
Installing on axles, no modifications required

COMMENTS:
Replacement Bearing Set, RPMC8570 Replacement Pillow-Ball Set Screws, RPMC0800 Do not use the TRA #5356 Long Travel Rocker Arm Set with these Axle Carriers. Doing so will void the RPM warranty. jxs 11/23/05 ir/jxs &