RPM R/C Products Inside Rear Hinge Pins RC10 (2) RPM70590

This is a pack of two optional RPM RC10 Inside Rear Hinge Pins. The re-release of the RC10 Classic has come with a few changes that affect users of the original RPM RC10 Rear A-arms (RPM70542). RC10 Classic A-arms aren t quite as wide as they used to be, so Associated shortened the length of their hinge pins (ASC6380). That means those hinge pins are not compatible with RPM A-arms or older versions of the stock RC10 A-arms. To rectify that problem, RPM contacted the original manufacturers of the stock Associated hinge pins and had a set made to the old specifications. These hinge pins are made in the USA, just like they were 20+ years ago!

NOTE:
RPM Inside Rear Hinge Pins are 2.28 O. A. L. , 1/8 in diameter and are sold in pairs with e-clips. These hinge pins work on the original RC10 & newer RC10 Classic when combined with RPM A-arms (RPM70542). They are not compatible with later versions of the RC10 such as the B2, B3, etc. , nor will they work on the RC10 Team Car. Team Associated RC10