RC4WD Plastic Exhaust Long Tube Headers for V8 Scale Engine V2 RC4ZS0313

NOTES:
Fits RC4WD 1/10 V8 Scale Engine (Z-S1043) These headers are designed to fit Z-S1043 RC4WD 1/10 V8 Engine, but will not mount on the Trail Finder 2 chassis without modifications. To install this item and RC4WD's Distributor and Rubber Tube for V8 Motor (Z-S1738) with V8 engine, please note that you should install the Distributor and Rubber Tube for V8 Motor (Z-S1738) before installing the Plastic Exhaust Headers for V8 Motor (Z-S1775). This item is 3D printed and constructed from a material that is prone to breaking. Please handle it with care during installation and use. The hollow exhaust design makes the part even more susceptible to damage under extreme conditions.

YOU WILL RECEIVE:
- 1x Left Exhaust Header - 1x Right Exhaust Header - 12x RC4WD Miniature Scale Hex Bolts (M1.6 x 5mm) (Silver) (Z-S1759) - 1x Miniature Scale Hex Bolt Tool for M1.6 Scale Bolts (1.5 mm Hex) (Z-S1328)

YOU WILL RECEIVE:
- Material: Resin - 3D Printed - Total Weight: 0.65oz / 18.6g