RC4WD Over/Underdrive Transfer Case:TF2 and Gelande II RC4Z-U0039

SPECIFICATIONS:
1.47 / 1 Gearing .8 Mod Gears Hardened Steel Gears Cast Casing Wide Gears Has same mounting as our popular Hammer Transfer Case Output Shaft OD: 0.19in / 5.0mm Total Weight: 6.21oz / 176g

YOU WILL RECEIVE:
1x RC4WD Over/Under Drive Transfer Case 1x 16T Gear 1x 17T Gear 1x 19T Gear 1x 20T Gear 1x M3 x 6mm Steel Button Head Cap Screws (Black) 1x M3 x 10mm Steel Button Head Cap Screws (Black) There are 6 gearing options available: 15T/22T (Stock) : 1 : 1.47 Gear Ratio - Front axle goes same speed as rear To change the gear ratio remove the cover on the side with the two shafts. The following are the gear combinations of Rear Output to Front Output: 17T / 19T combo = 1:1.27 front axle will rotate 27% faster than rear 16T / 20T combo = 1:1.33 front axle will rotate 33% faster than rear 19T / 17T combo = 1:1.42 front axle will rotate 42% faster than rear 20T / 17T combo = 1:1.57 front axle will rotate 57% faster than rear 20T / 16T combo = 1:1.67 front axle will rotate 67% faster than rear