This is the RPM True-Track Rear A-Arm Conversion in Blue for all versions of the Traxxas Revo.
Eliminates stock rear toe links, locking in the rear toe angle at 1.5 per side for a total rear toe-in angle of 3 Eliminates all rear bump steer for better rear end tracking regardless of terrain Replaces lower pivot ball with a 4mm diameter hinge pin for constant rear toe angle Retains stock upper pivot ball to allow camber adjustments Weighs a total of 1-1/8oz (32g) less than stock components
YOU WILL RECEIVE:
Two each Upper and Lower Rear A-Arms Two Axle Carriers Two 4mm Hinge Pins Four E-Clips Two 3x16mm Shock Mount Screws Two Aluminum Pivot Ball Set Screws Two Delrin Pivot Ball Bushing Cups Two 6x15mm Sealed Outer Bearings Two 12x21mm Sealed Inner Bearings Instruction sheet
Removing stock rear components
This True-Track system is compatible with the following RPM components; RPMC8237 Front Black A-Arms RPMC8238 Front Blue A-Arms RPMC8222 Black Front Upper and Lower Left A-Arms RPMC8585 RPM Axle Carriers/Steering Blocks Not compatible with the Traxxas #5356 Long Travel Rocker Set. jxs 4/08/08 ir/jxs&