PROTOform has a long heritage in RC Drag Racing. In fact, the first body our brand ever released back in 1992 was a Stealth Funny Car! So were getting back to our roots by introducing PROTOforms first-ever body dedicated to the fast-growing SC Drag Racing class: the Chevrolet Corvette C7 Pro-Mod. This body will transform your Slash 2WD into a scale 1/4-mile beast with a ton of realistic details to give your SC drag car a super unique, race-inspired look. The C7 Pro-Mod is a convenient 1-piece body design with no assembly necessary: just paint it up in your favorite colors and start burning rubber! We recommend using Pro-Lines Hoosier 2.2" Drag Racing Front Tires on the front and Hoosier Drag Slick SC 2.2"/3.0" Drag Racing Tires in the rear combined with a set of our Pomona Drag Spec Wheels for the ultimate scale hot-rod stance. To create a more scale look, the body is designed with a narrower track width than a traditional SC body and will require some modifications to your 2WD Slash in order to fit correctly. Here is the list of modifications needed to fit: Pro-Line Extended Body Mounts for Slash 2WD Tech tip: install the front mounts upside down to get the nose of the body as low as possible! Traxxas Bandit Front Arms - #2531X Traxxas Bandit Rear Arms - #2750R Traxxas Bandit Front Caster Blocks - #2432 Traxxas Bandit Steering Blocks - #3636 Traxxas Bandit Axles - #2437 Traxxas King Pins - #3740 Traxxas Front Camber Turnbuckles - #2444 Traxxas Rear Turnbuckles - #2443 Traxxas Toe Link Turnbuckles - #2445 Shorten Rear Drive Shafts Remove Front Bumper All bodies are sold in crystal clear polycarbonate and are painted for advertising purposes only.